View previous topic :: View next topic |
Author |
Message |
retrobrad Administrator
Joined: 08 Jun 2007 Posts: 1039 Location: NSW, Australia
|
Posted: Wed Nov 07, 2007 8:24 pm Post subject: |
|
|
mixojoe wrote: |
Uni has work committments there sorry. Otherwise I would be there for sure |
thats cool, hope you have fun there mate |
|
Back to top |
|
|
Azryl beginner
Joined: 25 Oct 2007 Posts: 26 Location: Melbourne Australia
|
Posted: Sat Nov 10, 2007 9:05 pm Post subject: |
|
|
I'm coming.. I wanna see the Mini-mig in operation
paid and waiting to go
Az |
|
Back to top |
|
|
whiteb beginner
Joined: 16 Oct 2007 Posts: 27
|
Posted: Sat Nov 10, 2007 11:02 pm Post subject: |
|
|
Azryl wrote: |
I'm coming.. I wanna see the Mini-mig in operation
paid and waiting to go
Az |
Been busy recently, but I have the bottom Perspex attached, which is going to save stress on the power supply Capacitors on the bottom side. |
|
Back to top |
|
|
Azryl beginner
Joined: 25 Oct 2007 Posts: 26 Location: Melbourne Australia
|
Posted: Sun Nov 11, 2007 7:43 pm Post subject: |
|
|
Geez the mini-mig really lives up to its name... almost small enough to hide inside your jacket as you walk all innocent out the door!
Hope to see it there and in final running state
hate to nick something not finished! hehe
Whiteb, can you bring along my mini-mig bare pcb? Will save cost of postage if I can pickup in Ballarat.
Az |
|
Back to top |
|
|
whiteb beginner
Joined: 16 Oct 2007 Posts: 27
|
Posted: Mon Nov 12, 2007 7:45 am Post subject: |
|
|
Azryl wrote: |
Geez the mini-mig really lives up to its name... almost small enough to hide inside your jacket as you walk all innocent out the door!
Hope to see it there and in final running state
hate to nick something not finished! hehe
Whiteb, can you bring along my mini-mig bare pcb? Will save cost of postage if I can pickup in Ballarat.
Az |
Sure Azryl, I was planning to. |
|
Back to top |
|
|
Ike intermediate
Joined: 16 Oct 2007 Posts: 200 Location: Melbourne, Australia
|
Posted: Wed Nov 14, 2007 1:41 pm Post subject: |
|
|
Hello Brad, I have some news No:11 Edward M might not be attending the convention as he had a Op done on Tuesday. If he can't make it, can someone else use his ticket?
Cheers
Ike _________________ Faith Divides Us, Death Unites Us |
|
Back to top |
|
|
mihcael beginner
Joined: 15 Nov 2007 Posts: 31
|
Posted: Thu Nov 15, 2007 7:41 pm Post subject: |
|
|
Hey!
Im coming, don't have no cool shit though? just another amigan, wanna come meet the amiga guys and see the minimig!!
(this whole forum full of threads... didnt know it was here, kept looking at the original announcement for updates, Doh! ) _________________ It's Brutal, and Inexcusable! and...Modp3 |
|
Back to top |
|
|
Azryl beginner
Joined: 25 Oct 2007 Posts: 26 Location: Melbourne Australia
|
Posted: Fri Nov 16, 2007 12:36 pm Post subject: |
|
|
I have not been to Ballarat very often.. can we have a map of where to go posted in the forums.
This would be a huge benefit to those visting
Az |
|
Back to top |
|
|
whiteb beginner
Joined: 16 Oct 2007 Posts: 27
|
Posted: Fri Nov 16, 2007 4:44 pm Post subject: |
|
|
Azryl wrote: |
I have not been to Ballarat very often.. can we have a map of where to go posted in the forums.
This would be a huge benefit to those visting
Az |
This is for me, from Melton, MOST direct, taking the Back streets, from western Freeway.
1. Head east on High St toward Smith St 2.2 km 4 mins
2. Turn right at Melton Hwy 0.7 km 3 mins
3. Slight right to merge onto Western Fwy 66.6 km 43 mins
4. Turn left at Old Melbourne Rd 0.6 km
5. Turn right at Warrenheip Rd 2.3 km 4 mins
6. Turn left at Navigators Rd 0.5 km 1 min
7. Turn right at Yankee Flat Rd 2.9 km 5 mins
8. Turn right at McCarthys Rd 1.4 km 2 mins
9. Turn left at Boundary Rd 1.0 km 2 mins
10. Slight right at Greenhill Rd 0.3 km
11. Continue on Bell Ave 0.4 km
12. Slight right 0.3 km 1 min
13. Turn right toward University Dr 0.5 km 1 min
14. Turn right at University Dr 0.4 km
Now, either follow that from Western Freeway, *OR* take the Western Freeway all the way out to Ballarat, turn left from freeway onto Ballarat/Burrumbeet road, left onto Princes road, right onto Barkly, then left onto Ballarat/Bunniyong Road (aka Geelong road) and follow that out to Mount helen, and left onto University drive.
|
|
Back to top |
|
|
tomz/TIDE Moderator
Joined: 08 Jul 2007 Posts: 562 Location: nsw.Australia
|
Posted: Fri Nov 16, 2007 8:23 pm Post subject: If youre coming to this event - REPLY TO THIS POST |
|
|
As a former melbournite and a former Silver top taxi driver I would just get to Geelong road and follow the signs,they're well posted and after an hour or so you suddenly find your self in Ballarat,what I would like to see for all you fortunate ones going to the convention is maybe some hints on where to go once you've reached Ballarat,but thats just me........
(and I cant get there this year )
tomz _________________ http://noname.c64.org/csdb/scener/?id=1971 |
|
Back to top |
|
|
|